BSSP Premier Single Pack Stuffing Box
No-bolt threaded cap design engineered for steam environments and high salt-water cut wells. Low profile at just 9-¾" keeps your footprint small without sacrificing seal integrity. Even packing adjustment every time — no bolts to corrode, no uneven compression.
Quick Specifications
BTM THREAD 2", 2-½", 3" API / LP
BOTTOM CONNECTION Male
HEIGHT 9-¾"
WEIGHT (2") 20 lbs.
WEIGHT (2-½" / 3") 21 lbs.
MATERIAL Ductile Iron
ROD SIZES 1" – 1-¾"
TOP CONES REQUIRED 3
BOTTOM CONES REQUIRED 1
Key Features
Why the BSSP
No-Bolt Threaded Cap
Steam & Salt-Water Ready
Designed specifically for the two harshest environments that destroy conventional bolted gland stuffing boxes: steam injection wells and high salt-water cut production wells.
Low Profile Design — 9-¾"
ECSS™ Compatible
Reduced Maintenance Time
Threaded cap allows packing adjustment without full cap removal. Convenient packing protection during rod stack-out operations — preventing contamination and damage between service cycles
Corrosion-Resistant Coatings
Optional coatings available for H₂S and chemical environments. Contact customer service for coating specifications and lead times before placing your order.
Full Specifications
PRODUCT TYPE Single Pack — Premier
BTM THREAD SIZES 2", 2-½", 3" API Tubing or LP
BOTTOM CONNECTION Male
CAP STYLE No-Bolt Threaded Cap
HEIGHT 9-¾"
WEIGHT — 2" BTM 20 lbs.
WEIGHT — 2-½" BTM 21 lbs.
WEIGHT — 3" BTM 21 lbs.
BODY MATERIAL Ductile Iron
ROD SIZES SUPPORTED 1", 1-⅛", 1-¼", 1-5/16", 1-⅜", 1-½", 1-¾"
TOP CONES REQUIRED 3
BOTTOM CONES REQUIRED 1
ENVIRONMENTAL GLAND BSE-LUG™
ECSS™ COMPATIBLE Yes — via BSE-LUG™
CORROSION COATING Available — Contact Factory
Product Notes
- No-bolt threaded cap eliminates bolt corrosion in steam and salt-water environments
- Low profile design ideal for short-stroke pumping units
- Even adjustment of packing every time — no uneven compression
- Cap provides convenient packing protection during rod stack-out
- Use BSE-LUG™ upper gland (not E-LUG™) for environmental compliance — Premier BS boxes require modified flange connection
- Packing life extended with WSI Polished Rod Lubricator
- All standard packing compounds available: Soft, Hard, Teflon, Brass Filled, HSN, High Temp, KB™, Super Life™ 575, SB Silicone, Super Dome™
Packing Options
Rod sizes 1" through 1-¾" in sets of 4 (3 top cone + 1 bottom cone). BSSP is compatible with all WSI split-cone packing compounds.
SOFT
SBR - Economy
HSN
HNBR - H₂S
SB SILICONE
HARD
SBR - Economy
HIGH TEMP
NBR - STEAM
SUPER DOME™
NBR/HNBR - PREMIER
TEFLON
SBR - Economy
KB™
BRASS FILLED
SUPER LIFE™ 575
POLYMER - PREMIER
Compatible Accessories
These WSI accessories install directly on the BSSP. Note: Premier BS boxes require the BSE-LUG™ — not the standard E-LUG™ — for environmental compliance.
BS Environmental Lube Upper Gland
Premier BS-specific upper gland. Modified flange design eliminates separation risk between gland and stuffing box body. Connects directly to ECSS™ Environmental Shutdown Switch. Required for environmental compliance on BSSP.
Polished Rod Lubricator
1 quart reservoir reduces friction heat between polished rod and packing. Extends BSSP packing life significantly. Recommended for all wells on timer controls that may stop on the upstroke.
Environmental Control Shut-Down Switch
NEC Class 1, Div. 1, UL listed environmental shutdown switch. Monitors fluid accumulation via BSE-LUG™ and automatically shuts down the pumping unit when fluid is detected. Standard and explosion-proof housings available.
Related Stuffing Boxes
Compare the BSSP to other Premier and Economy single-pack models, or step up to the BSDP for a double-pack solution.
BSTB™ - Premier Tee Base
1500 PSI
BSDP - Premier Double Pack
1500 PSI
SPSB - Economy Single Pack
1500 PSI
BSPCDP - Premier Pollution Control
1500-5000 PSI
